Appendix
TENORI-ON Manual 114
Troubleshooting
Symptom Possible Cause & Solution Page
SD Memory Card
Can’t record or play.
The SD Memory Card is write-protected. Set the card’s write-protect
switch to the OFF position.
page 63
Too much performance data. Performances that exceed 39KB (About
1000 operations) cannot be recorded.
–
Not enough remaining SD Memory Card capacity. Use a different SD
Memory Card.
–
Cannot perform file operations.
Save and rename operations can only be performed on up to 100 files
that have file names in which the first five characters are the same.
–
The SD Memory Card is write-protected. Set the card’s write-protect
switch to the OFF position.
page 63
Not enough remaining SD Memory Card capacity. Use a different SD
Memory Card.
–
The maximum number of files has been exceeded. Up to 1,000 files
can be stored in the TENORI-ON folder, or up to 256 files of each file-
extension type.
page 62
A loaded All Blocks, Current Block, or
Current Layer file does not play
automatically.
If playback is paused when a file is loaded, the loaded file will not be
played automatically. Return to the status display and press the [OK]
button to begin playback.
–
Others
The loop indicator doesn’t move.
The pause mode may have been engaged by pressing the [OK]
button. Press the [OK] button a second time.
–
The loop point and/or loop speed settings
have changed.
These settings change when the Play menu Master Loop Point and
Master Loop Speed settings are changed.
–
