Filter
Top Products
User Instructions
American DJ
4295 Charter Street
Los Angeles, CA 90058
www.americandj.com
DJ Scan/RG™ Introduction
©American DJ Supply® - www.americandj.com - DJ Scan/RG™ Instruction Manual Page 2
Introduction: Congratulations and thank you for purchasing the DJ
Scan/RG™ by American DJ®, one of the finest pieces of its kind on the
market today! The DJ Scan/RG™ is a great inexpensive, light weight,
intelligent fixture. Due to it’s physical specifications, it’s a great piece
for mobile DJ’s, roller rinks, small clubs, bars, and bowling centers.
When used in multiples of two or more, these units create an effect that
rivals that of units that can cost up to three times the price. The DJ
Scan/RG™ was designed to run in Master/Slave mode but can be used
with any universal DMX-512 controller.
Customer Support: American DJ® provides a toll free customer sup-
port line, to provide set-up and installation help and to answer any
question should you encounter problems during your set up or initial
operation. You may also visit us on the web at www.americandj.com
for any comments or suggestions. Toll free customer service hours are
Monday through Friday 9:00 a.m. to 5:30 p.m. Pacifi c Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
Warning! To prevent or reduce the risk of electrical shock or fi re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ® customer support.
Do not discard the shipping carton in the trash. Please recycle when
ever possible.
Improvements and changes in specifi cations and design to this
manual and unit may be made at any time without prior notice.
HALOGEN LAMP WARNING!
This fixture is fitted with a halogen lamp which is highly susceptible to
damage if improperly handled. Never touch the lamp with your bare
fingers as the oil from your hands will shorten the lamp life. Never
install, mount, or place this fixture in areas prone to heavy vibration.
Also, never move the fixture until the lamp has had ample time to cool.
Remember, lamps are not covered under warranty conditions.
Revised 8/01