Filter
Top Products
Due to fog residue, smoke, and dust, cleaning the internal and external
optical lenses must be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days. Situation may very. If used heavily in clubs with lots of
fog, cleaning may be required more often.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
©American DJ Supply® - www.americandj.com - DJ Scan/RG™ Instruction Manual Page 10©American DJ Supply® - www.americandj.com - DJ Scan/RG™ Instruction Manual Page 9
DJ Scan/RG™ Cleaning
DJ Scan/RG™ Lamp Replacement
Lamp Replacement: Caution! Never open the unit when in use.
Always disconnect the main power before attempting to replace the
lamp.
1. Be sure to follow the proper procedures when handling halogen
bulbs.
2. Lamp replacement has been made simple by incorporating the use
of a removable lamp tray and thumb screws.
3. Loosen the thumb screw on rear cover.
4. Remove the tray.
5. Remove and replace the bulb.
6. Reassemble.
Remember to always replace with the exact same type lamp and
fuse, unless otherwise specified by an authorized American DJ
service technician.
The DJ Scan/RG™ may be controlled by a wide range of controllers;
ie. Show Designer™, DMX Operator,™ Scene Setter™ or by the DJ
MINI/C basic controller.
MINI/C features:
DJ Scan/RG™ Optional Remote
The MINI/C controller may be purchased separately allowing you to
control the main unit, and any others connected to it, while it is in stand
alone mode. You can set the unit to blackout. If you have more than
one unit, make sure the remote control is plugged into the first unit in
the daisy chain. The remote control will not have any effect if the unit
is in DMX mode. When the unit is in blackout mode, the light will come
on next to the blackout button.
30 ft. cable
Stand by (Black out)