Filter
Top Products
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 3
•
Micro-Stepping Motors for Smooth Transitions
•
Uses Five DMX Channels
•
DMX-512 Protocol Compatible
•
Full Focusing
•
Fan Cooled.
•
17 Color/Gobo Combinations, Plus Spot
•
Strobes in Every Color
•
Built-In Programs
•
Room Type Function for Built-In Programs
•
355˚ Pan / 240˚ Tilt
•
2 Color Strobe Function
•
Digital Display
•
Master/Slave Operation
•
Linkable up to Four Units
•
Built-In Lamp Shut-Off Protection
•
Internal Microphone
•
Volume Sensitivity Knob
•
Built-In Rigging Point
•
Easy Lamp Replacement
•
Long Life ZB-JCR H5 (15v/150w) Lamp - 500 Hours
•
Optional MINI/C Blackout Controller
XP-3™ Features
The XP-3™ carries a one year (365 days) limited warranty. Please
fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. The
R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. number
must also be written down on a piece of paper and included in the
shipping container. If the unit is under warranty, you must provide a
copy of your proof of purchase invoice. You may obtain a R.A. number
by contacting our customer support team on our toll free customer
support number at (800)
322-6337
. All packages returned to service
not displaying a R.A. number on the outside of the package will be
returned to the shipper.
XP-3™ Product Registration
XP-3™ Safety Precautions
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 4
Safety Issues:
This unit may blow a fuse if the maximum allotted
load of 5 amps is reached. If the fuse needs replacement, always
replace the fuse with same exact type that was remove, unless other-
wise instructed by an authorized American DJ
®
service technician. Use
of a different type fuse from that which is recommended may cause fire
or electric shock and will void the manufactures warranty.
•
To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
•
Do not spill water or other liquids into or on to your unit
•
Do not attempt to operate this unit if the power cord has been frayed
or broken
•
Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short
•
Disconnect from main power before making any type of connection
•
Do not remove the cover under any conditions. There are no user
serviceable parts inside
•
Never plug this unit in to a dimmer pack
•
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
•
Do not attempt to operate this unit, if it becomes damaged
•
This unit is intended for indoor use only, use of this product outdoors
voids all warranties
•
During long periods of non-use, disconnect the unit’s main power
•
Always mount this unit in safe and stable matter
•
Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 7 for cleaning details
•
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
•
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.