Filter
Top Products
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 18
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 17
XP-3™ Cleaning
XP-3™ Trouble Shooting
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and external
optical lenses and mirror should be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which
the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club
use we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.
1.
Use normal glass cleaner and a soft cloth to wipe down the outside
casing.
2.
Use a brush to wipe down the cooling vents and fan grill.
3.
Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
4.
Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5.
Always be sure to dry all parts completely before plugging the unit
back in.
Trouble Shooting:
Listed below are a few common problems that you may encounter,
with solutions.
No light output from the unit;
1.
Be sure you have connected your unit into a standard 120V wall
outlet.
2.
Be sure the external fuse has not blown. The fuse is located on the
bottom panel of the unit.
3.
Remove the lamp cover and be sure the lamp is seated in its
socket properly. Occasionally lamps become loose during shipping
be sure the lamp is push in to its socket all the way.
4.
Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1.
Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may not
activate the unit.
2.
Be sure the
SENSITIVITY KNOB (5)
is not set to the minimum
position
XP-3™ Gobo Wheel Layout
This chart details the gobo patterns as well as the gobo placement on
the internal wheel.
Gobo one is the large spot. The arrow indicates
the wheel rotation.
GOBO 1