Filter
Top Products
on pages 5 - 7 as well as the set-up specifications that are included
with your DMX controller.
3.
Use the DMX controller’s faders to control the various DMX fixture
traits.
4.
This will allow you to create your own programs.
5.
When using a DMX controller and setting up for DMX operation
follow the DMX addressing procedure in your controller’s manual.
All fixtures must follow a specific DMX addressing protocol for
proper operation in DMX mode.
6.
For help operating in DMX operation consult the manual included
with your DMX controller.
7.
For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
XP-3™ Operation XP-3™ DMX Traits
The chart below details the DMX traits in depth. The individual trait
can only be accessed by using an universal DMX controller. Note: The
gobo patterns can be found on the next page.
0
255
0
335
CHANNEL 1
255
00
00
00
255
TILT
CHANNEL 2
00
255
GOBO/COLOR
CHANNEL 3
DMX TRAITS
XP-3
PAN
240
00
240-255
00-15 Large White Spot
16-23
24-31
Gobo1 -
Red
32-39
Gobo2 - Blue
40-47
Gobo3 - Gree
n
48-55
Gobo4 - Yellow
56-63
Gobo5 - Lt. Blue
64-71
Gobo6 - Orange
72-79
Gobo7 - Red / Green
80-87
Gobo8 - Purpl
e
88-95
Gobo9 - Red / Green /
Yellow / Lt. Blue
96-103
Go
b
o
10
-
W
h
it
e
104-111
Gobo 11 - Lt. Blue
112-11
9
Gobo12 - Ye
llow
120-127
Gobo13 - Lt. Blue / Yello
w
128-135
Gobo14 - Orange
136-143
Gobo15 - P
ink
Gobo17 -
Dk. Blue144-151
Gobo16 - Gree
n
Large White Spot
152-239 Rotation
Fast - 23
9
Slow - 152
00
00
STROBE / SHUTTER
255
CHANNEL 5
Strobe
16-239
240-255
Open
239
152
Close
01-15
16
23
9
Speed Slow 2 fps -16
Speed Fast 10 fps -239
G2 COLOR / OBO STROBE
Speed Slow 1 fps - 255
CHANNEL 4
255
Any Color/Gobo Up
129-255
Speed Fast 7 fps - 129
Speed Fast 7 fps -128
Any Color/Gobo Down
01-128
Speed Slow 1 fps - 01
Stop
00
00
Lamp Off
243
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 16
©
American DJ
®
- www.americandj.com - XP-3™ Instruction Manual Page 15
2 Color Strobe Function:
This features allows two adjacent Color/
Gobo combinations on the Color/Gobo wheel to strobe in and out of
each other. For example, Looking at the chart above. Gobo 1 is red
and gobo 2 is blue. Using the 2 Color Strobe function will allow red
and blue strobe. Another example is to take gobos 14 and 15 together,
gobo 14 is orange and gobo 15 is pink, therefore using the 2 Color
Strobe function will give off an orange and pink strobe. This feature
will work with any two color/gobo combination that next to each other
on the gobo wheel
The XP-3 ships with a built-in rigging point and two large holes in the
base of the unit that are to be used for safety cables. The rigging point
is located on the bottom of the unit. This rigging point is secured to the
xture by two large Phillips screws. When the rigging point is not to be
used and when the xture is shipped from the manufacture, the point
is shipped inverted. When the xture is to be hung by truss or other
means, please use the rigging point and secure the xture with safety
cables. Always be sure to rmly secure the rigging point to the unit. The
XP-3™ can be mounted to a wall or may hung from truss.
XP-3™ Mounting