Filter
Top Products
Setup 4‐3
Hi RES Parameters Continued
Level 1, Input Setup Block
Continued
Parameter P# Adjustable Range Factory User Setting
OP2 ANA IN1
TYPE
1463 0-None, 1-(-10V to+10V),
2-(-5V to+5V),
3-(4to20mA), 4-(0to20mA)
1
OP2 ANA IN1
Invert
1464 0-OFF, 1-ON 0
OP2 ANA IN1
Gain
1465 0.0% TO 300.0% 100.0
OP2 ANA IN1
Offset
1466 -100.0% TO 100.0% 0.0
OP2 ANA IN1
Deadband
1467 0.0% TO 75.0% 0.0
OP2 ANA IN1
Filter
1468 0 (No Filter) TO 6 (Max Filter) 0
OP2 ANA IN2
TYPE
1469 0-None, 1-(-10V to+10V),
2-(-5V to+5V),
3-(4to20mA), 4-(0to20mA)
1
OP2 ANA IN2
Invert
1470 0-OFF, 1-ON 0
OP2 ANA IN2
Gain
1471 0.0% TO 300.0% 100.0
OP2 ANA IN2
Offset
1472 -100.0% TO 100.0% 0.0
OP2 ANA IN1
Deadband
1473 0.0% TO 75.0% 0.0
OP2 ANA IN1
Filter
1474 0 (No Filter) TO 6 (Max Filter) 0
OP2 parameter selections (P#1463 to 1474) are available if the
expansion board is installed in Slot2 of the Control.