Filter
Top Products
15 B-CONTROL FADER BCF2000/ROTARY BCR2000 User Manual
4.3.2 Programming in EDIT mode
Various types of MIDI commands (Pitchbend, After Touch, MMC etc.) are assigned
to the individual control elements in EDIT mode.
• To activate the EDIT mode, press and hold the EDIT button and operate
a control element. This can be a fader, sustain pedal (BCF2000 only),
an encoder (BCR2000 only), a push encoder, a button or footswitch.
The control element is indicated in the display (e.g. E 24 or Fd 8)
◊ When using push encoders, select an encoder group beforehand.
In addition, you have to differentiate between turn and push function.
• Release EDIT; you are now in the EDIT mode
• Using the push encoders, you can now assign MIDI commands to the selected
control element. You will nd all possible MIDI function in tables 4.1 and 4.2,
including all accompanying explanations
• If you want to assign MIDI data to additional control elements, just press
and hold the EDIT button and move one of the control elements. Now, let go
of both controls and use the push encoders to assign a function to it
(see tables 4.1 and 4.2)
• To leave the EDIT mode, press EXIT
◊ Initially, all settings made here are stored temporarily! If you intend to
store them in a preset, please see chapter 4.2.2.
The detailed EDIT functions are described in the following two tables.
With the assignable control elements, we dierentiate between CONTINUOUS
and SWITCH types.
• CONTINUOUS-type control elements (table 4.1) include the eight BCF2000
faders and sustain pedal, the 24 encoders of the BCR2000, the turn function
of the push encoders
• SWITCH-type control elements (table 4.2) are buttons, press functions for
push encoders and footswitches
CONTINUOUS TYPE CONTROLLERS (encoders, turn function of Push Encoders, faders, foot controller)
PUSH ENCODER
1 2 3 4 5 6 7 8
MIDI Data Type MIDI Send Channel Parameter Value 1 Value 2 Controller MODE Controller Option Display Value
PROGRAM CHANGE 1-16 O, Bank Select MSB O, Bank Select LSB — — See below 1*
Value indication:
On/O
CC
(Control Change)
1-16 CC-0-127
Min. value:
0-127/16383
Max. value:
0-127/16383
Absolute
Absolute (14-Bit)
Relative 1
Relative 2
Relative 3
Relative 1 (14-Bit)
Relative 2 (14-Bit)
Relative 3 (14-Bit)
See below 1*
Value indication:
On/O
NRPN
(Non Registered
Parameter Number)
1-16
NRPN Parameter
Number
Min. value:
0-127/16383
Max. value:
0-127/16383
Absolute
Absolute (14-Bit)
Relative 1
Relative 2
Relative 3
Relative 1 (14-Bit)
Relative 2 (14-Bit)
Relative 3 (14-Bit)
Inc/Dec
See below 1*
Value indication:
On/O
PITCH BEND 1-16 — Range 0-127 — — See below 1*
Value indication:
On/O
AFTER TOUCH 1-16
Key number
0-127, ALL
(All = Channel
Aftertouch)
Min. value:
0-127
Max. value:
0-127
— See below 1*
Value indication:
On/O
GS/XG 1-16
Select GS/XG-Main
Control-parameter
with clear text
indication
Min. value:
0-127"
Max. value:
0-127"
— See below 1*
Value indication:
On/O
1*) Controller option:
a) Push Encoders LED behaviour: Off, 1d (1 LED on), 1d- (1 LED on, but value 0 = LED off), 2d, 2d-, Bar, Bar-, Spread, Pan, Qual(ity 'Q'), Cut(off), Damp(ing)
b) Faders: Move, Pick-Up, Motor (only BCF2000)
c) Foot controller: Move, Pick-Up (only BCF2000)
Tab. 4.1: Assignment of the push encoders in EDIT mode (CONTINUOUS types)