Filter
Top Products
13
E
3. INSTALLATION
Your Behringer AUTOCOM PRO was carefully packed in the factory and the packaging was designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the packaging
and its contents for any signs of physical damage, which may have occurred in transit.
+ If the unit is damaged, please do not return it to us, but notify your dealer and the shipping
company immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1 Rack Mounting
The Behringer AUTOCOM PRO fits into one standard 19" rack unit of space (1 3/4"). Please allow at least an
additional 4" depth for the connectors on the back panel. Be sure that there is enough air space around the unit
for cooling and please do not place the AUTOCOM PRO on high temperature devices such as power amplifiers
etc. to avoid overheating.
3.2 Mains Voltage
Before you connect your AUTOCOM PRO to the mains, please make sure that your local voltage
matches the voltage required by the unit! The fuse holder on the female mains connector has 3 triangular
markers, with two of these triangles opposing each other. Your AUTOCOM PRO is set to the operating voltage
printed next to these markers, and can be set to another voltage by turning the fuse holder by 180. CAUTION:
this instruction does not apply to export models exclusively designed, e.g. for 115 V operation!
3.3 Audio Connections
The audio inputs and outputs on the Behringer AUTOCOM PRO are fully balanced. If possible, connect the unit
to other devices in a balanced configuration to allow for maximum interference immunity.
+ Please ensure that only qualified persons install and operate the AUTOCOM PRO. During in-
stallation and operation the user must have sufficient electrical contact to earth. Electrostatic
charges might affect the operation of the AUTOCOM PRO!