Filter
Top Products
SETUP MENU
44
To improve AM reception, connect a 15 ft. to 18 ft. length of vinyl-coated wire to the AM LOOP
terminals without disconnecting the supplied AM loop antenna. For the best possible reception,
suspend horizontally outdoors.
ZONE 2
Cinema 11a's front panel and main remote handset can control ZONE 2 output sources and
volume control in the SETUP MENU.
- Zone 2
- Zone 2 input
- Zone 2 volume
TO SET ZONE 2 INPUT
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / SPEAKER appears.
2. Press the
button until INPUT is selected.
The SETUP MENU/ INPUT menu appears.
3. Press the
button until RADIO is selected.
4. Press the button until ZONE 2 is selected.
5. Press the ENTER button to enter the ZONE 2 INPUT menu.
6. Use the
and buttons to select the zone 2 input sources.
You can select INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7,
INPUT 8, 7.1CH ( L & R ONLY) FM, AM, HDFM, HDAM, HDMI 1 and HDMI 2.
7. Press the
button to select GOTO MAIN MENU and press the ENTER to return to the
ZONE 2 menu, or press the SETUP button to exit the SETUP MENU.
TO SET ZONE 2 VOLUME
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / SPEAKER appears.
2. Press the
button until INPUT is selected.
The SETUP MENU/ INPUT menu appears.
3. Press the button until RADIO is selected.
4. Press the button until ZONE 2 is selected.
5. Press the ENTER button to enter the ZONE 2 INPUT menu.
6. Press the
button until ZONE 2 VOLUME is selected.