Filter
Top Products
SETUP MENU
45
7. Use the
and buttons to select the zone 2 output volume.
You can adjust the zone 2 volume level from -90dB to +15dB.
8. Press the
button to select GO TO MAIN MENU and press the ENTER to return to the
ZONE 2 menu, or press the SETUP button to exit the SETUP MENU.
ADVANCED SETTINGS
Other options included in the SETUP menu are:
Password...........................Off / On / Change
HDMI Audio Out.................Off / On
AV SYNC Delay ..................Off / 1-100ms (1 ms = approx. 1 foot or 1/3 meter)
Bright................................High / Mid / Low / Off
Edit Custom Name
IR Controls ........................Front / Rear / Both
Zone 2 IR Ctrls...................Front / Rear / Both
Rear IR Mode ....................Normal / Invert
Zone 2 IR Mode .................Normal / Invert
TRIGGER........................... Zone 1 / Zone 2 / Zone 1 & 2
Auto Input Seek.................Off / On
Late.................................. Off / Half / Full (Dolby Digital only)
Restore Default..................Restore Default / Restore Default OK!
TO SET PASSWORD
Setting a password allows you to keep settings from being changed by visitors, children or others
curious about your Cinema 11a.
1. Press the SETUP button to enter the SETUP MENU.
The SETUP MENU / LISTENING PROFILES appears.
2. Press the
button until ADVANCED SETTINGS is selected.
The SETUP MENU/ ADVANCED SETTINGS menu appears.
3. Press the ENTER button to enter the PASSWORD menu.
4. Press the ENTER button to enter set the PASSWORD MODE menu.
5. Use the
and button to select the OFF mode, ON mode.
When you choose the ON mode, you will have to key in the password the next time you
enter the SETUP menu.
The Default Preset Password is 0, 0, 0, 0 when you receive the Cinema 11a.
6. Press the
button to select the PASSWORD CHANGE mode.
7. Press the ENTER button to enter the change ENTER OLD PASSWORD menu.
Key-in the old password (password preset 0, 0, 0, 0)
*, *, *, *, Enter the New Password: _, _, _, _, ReEnter the password:_,_,_,_.
Password set!