Filter
Top Products
SETUP MENU
49
Note: This option only operates with a Dolby Digital or Dolby Digital EX source and one
of these modes is active. This option allows you to set the 50% of Dynamic Range
Compression used when the Cinema 11a is placed into the LATE Half mode and set
100% of Dynamic Range Compression used when you select the LATE mode in Full. This
mode can also be selected by pressing the LATE button on the remote control.
This mode of operation makes the softest sounds louder and the loudest sounds softer,
reducing the overall dynamic range. You will notice that the vocal dialogue is easy to
understand in this mode, even when playing quietly.
TO SET RESTORE DEFAULT
1. Press the
button until RESTORE DEFAULT is selected.
2. Press ENTER to run the RESTORE DEFAULT.
NOTE: When the processor is reset, you will lose all settings.
When you are finished with the reset, the display appears:
OTHER
Restore Default!
3. Press the
button to select GOTO MAIN MENU and press the ENTER to return to the
OTHER menu, or press the SETUP button to exit the SETUP MENU.