Filter
Top Products
SETUP MENU
47
4. Use the
button to advance to the next character space. The cursor will automatically
wrap to the first character space when the last (twelve) character space is passed.
5. Use the
button to return to the previous character space.
6. Press the ENTER to restore the custom input names.
7. Press the
button to select BACK and press the ENTER to return to the EDIT CUSTOM
NAME menu, or press the SETUP button to exit the SETUP MENU.
TO SET INFRARED REMOTE CONTROLS
To set IR Controls:
If you select ‘rear,’ the front will ignore infrared remote commands. Use the front panel buttons
to make changes in the case.
1. Press the
button until IR Controls is selected.
The ADVANCED SETTINGS/IR CONTROLS menu appears.
2. Use the
and buttons to select the FRONT mode, REAR mode or Both mode.
When you select FRONT mode, the remote sensor uses the front panel IR sensor.
When you select Rear mode, the Cinema 11a's remote sensor does not function. You
need an optional remote control sensor connected to the back panel IR INPUT 1 or use
the buttons on the front panel to change back to front mode. When you select Both
mode, the remote sensor uses the front panel IR sensor and optional remote control
sensor.
To set Zone 2 IR Controls:
If you select ‘rear,’ the front will ignore infrared remote commands. Use the front panel buttons
to make changes in the case.
3. Press the
button until IR Controls is selected.
The ADVANCED SETTINGS/IR CONTROLS menu appears.
4. Use the
and buttons to select the FRONT mode, REAR mode or Both mode.
When you select FRONT mode, the remote sensor uses the front panel IR sensor.
When you select Rear mode, the Cinema 11a's remote sensor does not function. You
need an optional remote control sensor connected to the back panel IR INPUT 1, or use
the buttons on the front panel to change back to front mode. When you select Both
mode, the remote sensor uses the front panel IR sensor and optional remote control
sensor.
To set Zone 1 Rear IR Mode:
The setting selects the polarity of the Zone 1 rear IR sensor. When you select NORMAL, the
Polarity is positive. When you select INVERT, the Polarity is negative.
1. Press the
button until REAR IR Mode is selected.
The ADVANCED SETTING / REAR IR Mode menu appears.