Filter
Top Products
English
Sampling Sounds and Playing Them on the Digital Piano
E-23
You can use the following procedure to specify a sampled
tone number and delete its data.
1.
Press
7
and then use the
cl
(10-key) [4] (u)
and [6] (i) keys to display “DELETE” (page
E-6).
2.
Press the
cl
(10-key) [7] (ENTER) key.
3.
Use the
cl
(10-key) [–] and [+] keys to select the
tone number of the data you want to delete.
4.
Press the
cl
(10-key) [7] (ENTER) key.
This displays a delete confirmation message.
5.
Press the
cl
(10-key) [+] (YES) key to delete the
data, or [–] (NO) or [9] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 2
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see “Editing Sampled Drum Set
Sounds” on page E-21.
You can use the following procedure to protect each sampled
sound against accidental deletion.
1.
Press
bt
and then use
cl
(10-key) to enter the
tone number of the sampled tone you want to
protect.
2.
Press
7
and then use the
cl
(10-key) [4] (u)
and [6] (i) keys to display “SAMPLING” (page
E-6).
3.
Press the
cl
(10-key) [7] (ENTER) key.
4.
Use the
cl
(10-key) [4] (u) and [6] (i) keys to
display “Protect”.
5.
Press the
cl
(10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
■Saving Sample Data on an External Device
• SD memory card (page E-58)
• Computer (page E-65)
Deleting a Sampled Sound
D E L E T E
Flashes
S 1 : O r
g
n l
Used memory
(Unit: Kbytes)
Remaining memory
capacity
S u r e ?
Protecting Against Accidental Deletion of
Sampled Sounds
P r o t e c t
*
1 : O r
g
n l
Protected