Filter
Top Products
Other Useful Digital Piano Functions
E-54
The Arpeggiator makes it possible to play an arpeggio pattern
automatically. There are 90 different arpeggio patterns from
which to choose in order to match the music you are playing.
• The Arpeggiator is controlled using the same button
dk
as
Auto Harmonize (page E-40). Because of this, these two
functions cannot be used at the same time.
1.
Hold down
dk
until the Auto Harmonize or
Arpeggiator type number and type name appear
on the display.
• If you do not perform any operation for a few seconds,
the display will return to the previous screen
automatically.
2.
Use the
cl
(10-key) [–] and [+] keys to select the
Arpeggiator type you want.
• 01 through 12 are Auto Harmonize types (page E-40).
Do not select them when using the Arpeggiator.
3.
Press
dk
to turn on Arpeggiator.
Playing a chord on the keyboard will start arpeggio play.
• Press
dk
again to turn off Arpeggiator.
• The tempo setting of the Arpeggiator is the same as that set
for the metronome (page E-10).
Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard keys.
1.
Press
7
and then use the
cl
(10-key) [4] (u)
and [6] (i) keys to display “OTHER” (page
E-6).
2.
Press
cl
(10-key) [7] (ENTER) key.
3.
Press the
cl
(10-key) [+] key to select the ON
setting.
Using the Arpeggiator
D u e t 1
Type number Type name
1 U
p
1
Speed (The number of arpeggio notes per beat)
Octave
1...Uses the actual notes played.
2...Uses the actual notes played plus the same notes one octave.
4... Uses the actual notes played plus the same notes three octaves.
Type
number
Type Name Description
13-30 Up Rising
31-48 Down Falling
49-66 U/D A
Repeat pattern alternating
between rising and falling
(Type A)
67-84 U/D B
Repeat pattern alternating
between rising and falling
(Type B)
85-102 Random
Random arrangement of
notes of the pressed keys
Sustaining an Arpeggio (Arpeggiator Hold)
S t . G r P n o
Lit when on
A r
p
e
g
H l d