Casio WK-1630 Musical Instrument User Manual


 
E-44
3.
Press the RECORD button to enter record standby.
The REC indicator appears, and the frame around the CH11
(Track 1) flashes on the display.
Channels CH 11 through CH 16 of the level meter show which
tracks already contain recorded data. See Level Meter Dur-
ing Record Operations on this page for details on how to
read the level meter.
4.
Select the track whose contents you want to delete.
Use CHANNEL buttons CH11 (Track 1) through CH16 (Track
6) to select the track you want.
5.
Press [+] and [] at the same time.
6.
Press YES to delete the selected track or NO to abort
the delete operation.
After a few moments, the keyboard exits the record opera-
tion.
The message dEL No Data appears on the display for about
one second if the track you selected in step 4 does not con-
tain any data.
733A-E-046A
9.
After you are finished, press START/STOP to stop re-
cording.
The REC indicator disappears from the display when record-
ing is stopped.
10
.
At this point you can repeat steps 3 through 9 for oth-
er tracks, if you want.
Playback Tracks
When recording to a track with the Song Sequencer, the contents of
any tracks that are already recorded normally play back. These are
called playback tracks. You can turn playback tracks on (so they play
during recording) or off (so they dont play). See Turning Channels
On and Off on page E-29 for details.
Level Meter During Record Operations
Channels CH11 through CH16 correspond to Tracks 1 through 6.
During record standby, the level meter shows which tracks are al-
ready recorded. Three level meter segments indicate a channel is al-
ready quoted, while no segment indicates that the channel is empty
(unrecorded).
Recorded tracks
Empty (unrecorded) tracks
To Delete the Contents of a Specific
Track
Note that a track delete operation cannot be undone. Make sure you
no longer need the contents of a track before you delete them.
1.
Press the SONG button once.
This causes the indicator lamp above the SONG button to
light.
2.
Select the user song area that contains the track whose
contents you want to delete.
Use [+] and [] to select User Song Area 0 (SG0) or User Song
Area 1 (SG1).
AMPENVELOPE
00 FLAT
01-17 VIBRATO
18-45 OTHERS
DECAY
SUSTAIN
PITCHENVELOPE
MIN
MAX
FULL RANGE
CHORD
CASIO CHORD
SONG
FINGERED
PATTERN
EXTERNAL
INTERNAL
UPPER1
CH 1
UPPER2
CH 2
LOWER1
CH 3
LOWER2
STOREBANK
CH 4
ACC VOL.
CH 5
CHORD1
CH 6
CHORD2
CH 7
CHORD3
CH 8
BASS
CH 9
RHYTHM
CH 10
TR1
CH 11
TR2
CH 12
TR3
CH 13
TR4
CH 14
TR5
CH 15
TR6
CH 16
789
456
1
0
23
PARAMETER RESET:
DELETE
/YESS/NO
MAIN MANU/
CHANNEL VOLUME:
SUB MANU/
CHANNEL SELECT:
] (YES/NO)
WK-1800/1600(E)-39~47 03.7.31, 5:21 PMPage 44 Adobe PageMaker 6.5J/PPC