Casio WK-1630 Musical Instrument User Manual


 
E-57
4.
Press the [̇] or [̈] cursor key to move the cursor to
the rhythm name input area, and input a name for the
rhythm.
Use [+] and [] to scroll through letters at the current cursor
location.
Use the [̇
] and [̈] cursor keys to move the cursor left and
right.
5.
After you are finished inputting the name, press the
ENTER button to save the rhythm pattern under the
name you specified.
The message Complete appears on the display for about
one second, and then the Pattern Sequencer turns off. The
currently selected rhythm at this time is the one you just
saved.
If the rhythm number you specified already contains a
rhythm, the message Replace? appears when you press
ENTER in step 5 above, to ask whether you want to replace
the existing rhythm with the new one. Press YES to replace
or NO to return to step 1 of the above procedure so you can
specify a different rhythm number.
To exit the Pattern Sequencer Mode without
saving work area contents
1.
Press the PATTERN button.
This causes the message shown below to appear, which asks
if you want to save work area contents.
2.
Press the NO key.
The above message asks if you really want to delete work
area contents.
3.
Press the YES key to exit without saving work area
contents, or NO to abort this operation and return to
the Pattern Sequencer Mode.
733A-E-059A
3.
Use the number keys or [+] and [] to specify the user
rhythm number where you want to save the pattern,
and then press the ENTER button.
You can input any number in the range of 120 to 129.
WK-1800/1600(E)-48~57 03.7.31, 5:22 PMPage 57 Adobe PageMaker 6.5J/PPC