Filter
Top Products
E-41
Mixer Function
Using the Parameter Edit Mode
Editing the Parameters for Channels
1 through 16
In the Parameter Edit Mode, you can change the settings of
ten different parameters (including tone, volume, and pan
pot) for the channel you selected on the Mixer screen.
To change parameters
1
Press the MIXER button.
• This causes the MIXER indicator to appear on the
display.
2
Press a CHANNEL button (1 through 16) to select a
channel.
• Use the [̇ ] and [̈] CURSOR buttons to change
between channels.
3
Use [̆] and [̄] CURSOR buttons to select the
parameter whose setting you want to change.
Example: Select volume setting by displaying “Volume”.
• Each press of [̆] or [̄] CURSOR button cycles
through the parameters.
• You can use the [̇] and [̈] CURSOR buttons to
change to another channel at any time during this
procedure.
Indicates channel volume of 127
V o l ume
4
Use the number buttons or [+] and [–] to change
the parameter setting.
Example: Change the setting to “060”.
• Pressing the MIXER or EXIT button exits the
parameter edit mode.
Editing DSP Channel Parameters
1
Press the CHANNEL (DSP) button.
• This selects the DSP channel.
• Pressing the [̇] CURSOR button while the DSP
channel is selected returns to Channel 16.
CHANNELMIXER
CURSOR
Number buttons
[+]
/
[–]
V o l ume