Filter
Top Products
E-96
Disk Drive Error Messages (WK-3800 Only)
Display Message Cause
Action
Err ReadOnly
Err Format
Err Disk R/W
Err DiskFull
Err Mem Full
Err Not SMF0
Err No Disk
Err No Data
Err No File
Err Protect
Err Convert
Err WrongDat
Err Name
Attempt to save a file using the same name as
an existing file that is read only.
1. The format of the diskette is not compatible
with this keyboard.
2. The diskette is not formatted.
3. The diskette is damaged.
The diskette is damaged.
The diskette is full.
Keyboard memory became full while
importing data from diskette.
The file you are reading is not an SMF 0 format
file.
1. The diskette is not loaded in the drive
correctly.
2. No diskette is loaded in the drive.
You are attempting to save data to a diskette
while a keyboard user area that does not
contain any data is selected.
1. The keyboard cannot find any file it can
read on the diskette.
2. You are trying to store an SMF to a diskette
when there is no SMF in keyboard memory.
The diskette is write protected.
There is not enough unused memory available
to save data produced by converting song data
from SONG format to SMF format.
The file you are reading is a wrong format file.
The data on the diskette is corrupted.
A file with the same name as the one you are
trying to use already exists on the floppy
diskette.
Save the new file to a different diskette or use
another name.
1. Change to a diskette that has the proper
format.......................................................E-86
2. Format the diskette. ...............................E-93
3. Use a different diskette.
Use a different diskette.
1. Use a different diskette.
2. Delete any files you no longer need in order
to make room for the data you want to save.
..................................................................E-92
1. Delete any SMF data, waveform data, or
accompaniment data that you no longer
need from the keyboard’s memory to free
up keyboard flash memory space........E-74
2. If you have song data stored in Song
Memory (SG0 to 4), delete the song data
you no longer need. ...............................E-64
Use SMF 0 format files only
1. Eject the diskette from the drive and reload
it. ...............................................................E-87
2. Load a diskette into the drive.
Select a keyboard user area that contains data.
1. Use a diskette that contains data stored by
this keyboard or compatible data from
another device.
2. —
1. Use a different diskette.
2. Close the diskette’s write protect hole to
enable data storage. ...............................E-86
Delete any SMF data, waveform data, or
accompaniment data that you no longer need
from the keyboard’s memory to free up
keyboard flash memory space (page E-74).
Use other data or another diskette.
Use a different name (page E-91).
Saving Data