Filter
Top Products
E-93
4
Press the [̄] CURSOR button to advance to the
file type selection screen.
5
Use the [̇] and [̈] CURSOR buttons to select the
type of the file you want to delete.
6
Press the [̄] CURSOR button to display the file
name selection screen.
7
Use the [̇] and [̈] CURSOR buttons or [+] and
[–] buttons to select the name of the file you want
to delete.
• You could also use the number buttons to input a
three-digit file number. The file number is shown in
the number area of the display.
8
After selecting the file, press the [̄] CURSOR
button.
• This will display a confirmation message asking
whether you really want to delete the file.
9
Press the YES button to delete the file.
• This will cause the message “Pls Wait” to appear on
the display to indicate that a card access operation is
being performed. Never try to perform any other
operation on the keyboard while the card is being
accessed. The message “Complete” will appear on the
display after file deletion is complete. After a few
seconds, the message will be replaced by the file name
selection screen.
• If you do not want to continue with file deletion, press
the EXIT button or the NO button in response to the
above confirmation message. This will return you to
the file name selection screen.
0
After you are finished performing the delete
operation, press the DISK/CARD button (CARD
button on the WK-3300/WK-8000) to exit the Card
Mode.
Saving Data
Formatting External Storage Media
Use the procedures in this section to format external storage
media before using it for the first time, or when you want to
delete all of the contents on an SD memory card or floppy
diskette.
IMPORTANT!
• Before performing the procedure below, check to make
sure that the media does not contain any data you might
need.
• Formatting an SD Memory Card
The SD memory card format operation performed by
your keyboard is a “quick format”. If you want to
completely delete all of the data on the card, format it
on you computer or using some other device.
PREPARATION
• SD Memory Card
• Insert the SD memory card you want to format into
the keyboard’s card slot. Make sure that the write-
protect switch of the memory card is not in the write-
protect position.
• Floppy Diskette (WK-3800 Only)
• Insert the floppy diskette you want to format into the
keyboard’s floppy disk drive. Make sure that the
diskette’s write protect hole is closed, which enables
writing.
To format external storage media
1
What you should do first depends on the type of
storage media you are using.
• SD Memory Card
On the WK-3800, press the DISK/CARD button twice.
On the WK-3300/WK-8000, press the CARD button
once.
• This causes the CARD indicator (the DISK/CARD
indicator on WK-3800) to appear on the display, and
also displays “Card” in the display’s text area.
• Floppy Diskette (WK-3800 Only)
Press the DISK/CARD button.
• This causes the DISK/CARD indicator to appear
on the display, and also displays “Disk” in the
display’s text area.
NOTE
• After pressing the DISK/CARD button (WK-3300/WK-
8000: CARD button) once, you can use the [̇] and [̈]
CURSOR buttons to select the external storage media.