Filter
Top Products
Chapter 7 Advanced Configuration for Compex SGX3226
54
7.7 MirrorPort Config
7.7.1 Using Mirror Port to monitor Traffic
This function allows you to set up a ‘mirror’ port of any specified port/s,
such that you can monitor the traffics of the monitored port/s or VLAN
without intervening them. In effect, the traffics on the monitored port/s are
replicated on the mirror port that you can use a protocol analyzer to analyze
the traffic for specific problem.
1. Go to MirrorPort Config from the Command window.
2. Select one Mirror Port.
3. Click on the dashed line ‘–’ on that particular port if you want to select
it as a Mirrored Member (T).
4. Hit on Apply button after you are satisfied with the setup. Click Save
button to update the latest configuration.