Filter
Top Products
11
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Setting the beat
1
Press the BEAT , buttons to set the number of
beats.
2
When the TIME button is pressed, the
mode is changed to the time input mode.
The time can be adjusted by pressing the
BEAT ,
buttons.
3
When the TIME button is pressed again, the number
of beats setting mode is restored.
Crossfader Start
1
Using the channel input source selector controls
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
Set the CROSSFADER ASSIGN switches (A/THRU/B)
to A or B.
3
Turn on the CROSSFADER START switches.
4
Slide the Crossfader all the way in direction opposite
the source you want to start. (In the following example,
startup is done with the CD player connected set to
Assign A.)
5
Set the standby mode on CD player.
6
Use the CROSSFADER CONTOUR control to control
the cross fader startup curve.
7
When the Crossfader is slid in the opposite direction,
CD player play will begin.
Channel Fader Start
1
Using the channel input source selector controls
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
Turn on the CH FADER START switch.
3
Move the Channel input fader (CH FADER) of CH-1,
CH-2, CH-3 or CH-4 control all the way to the
bottom.
4
Set the standby mode on CD player.
5
When you want to start the player, move up the
Channel input fader (CH FADER) and the CD player
will begin playing.
Fader Start
Selecting the effects
Turn the EFX SELECT controls to select the effect, and press the control
to enter the desired effect.
Turning the effects ON and OFF
When the Effect ON/OFF buttons are pressed, the effect is turned ON
or OFF.
Fader Start