Filter
Top Products
19
Getting Started Connections Basic Operations Specifi cations Troubleshooting
Effector Function Fader Start UtilityUSB
Specifi cations
n
AUDIO (0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms)
• PHONO inputs Stereo x 4 Unbalanced RCA terminal
Input impedance: 47 kΩ/kohms
Level: –40 dBV (10 mV)
• CD inputs Stereo x 4 Unbalanced RCA terminal
Input impedance:
10 kΩ/kohms
Level: 0 dBV
• Equalizer (LINE) Band x 3
Channel equalization adjustment range:
HI: –∞,–90 dB to +10 dB
MID: –∞,–90 dB to +10 dB
LOW: –∞,–90 dB to +6 dB
• RETURN inputs Monaural x 2 1/4" TS terminal
Input impedance: 10 kΩ/kohms
Level: –10dBV/0dBV (Default: –10dBV)
• MIC inputs Monaural x 2
MIC1: Balanced and unbalanced XLR connectors and 1/4" TS terminal
(1: Ground, 2: Hot, 3: Cold)
MIC2: Balanced 1/4" TRS jack
(Tip: hot, ring: cold, sleeve: ground)
Input impedance: 5 kΩ/kohms
Level: –60 to –20 dBu
EIN: Less than –127 dBu (Rs = 150 Ω/ohms)
CMRR: More than 80 dB (1 kHz)
• Equalizer (MIC) Band x 2
Adjustment range: HI: –15 to +15 dB
LOW: –15 to +15 dB
• Digital coaxial inputs Stereo RCA terminal x 4, IEC958 Consumer (Fs: 32 kHz to 96 kHz)
• USB audio inputs
Stereo x 4 (monaural x 8) 24 bit, Fs: 44.1 kHz, 48 kHz, 96 kHz USB B
• MASTER output
Balanced: Stereo, balanced XLR terminal
(1: Ground, 2: Hot, 3: Cold)
DA converter: 32-bit 128x oversampling advanced multi-bit converter
Load impedance: More than 600 Ω/ohms
Level: +4dBu
Frequency response: 20 Hz to 20 kHz (±0.5 dB)
THD: Less than 0.05%
Signal to Noise ratio: 100 dB
89 dB (Phono)
Crosstalk: Less than –110 dB (1 kHz)
Unbalanced: Stereo RCA terminal
Load impedance: 10 kΩ/kohms
Level: 0 dBu
• REC output Stereo Unbalanced RCA terminal
Load impedance: 10 kΩ/kohms
Level: –10 dBV
• BOOTH output Stereo
Balanced 1/4" TS terminal
(Tip: hot; ring: cold, sleeve: ground)
Load impedance: More than 600 Ω/ohms
Level: +4 dBu
• SEND output Monaural x 2
Unbalanced 1/4" TS terminal
Load impedance: 10 kΩ/kohms
Level: –10 dBV
• Headphones output Stereo
Load impedance: 40 Ω/ohms
Level: 400 mW
• Digital coaxial output Stereo RCA terminal, IEC958 Consumer
(Fs: 44.1 kHz, 48 kHz, 96 kHz)
• USB audio output Stereo x 4 (monaural x 8) 24 bit, 44.1 kHz, 48 kHz, 96 kHz USB B
n
GENERAL
USB MIDI I/O: IN: 1ch, OUT: 1ch MIDI1.0, MIDI Clock USB B
MIDI OUT: OUT: 1ch MIDI1.0, MIDI Clock 5pin DIN
Channel level meters: PPM 16-point LEDs from –40 to +10 dB, peak display
Cue master level meters: PPM 24-point LEDs from –50 to +16 dB, peak display
Channel Fader: 60 mm Conductive Plastic Type fader
Crossfader: 45 mm FLEX Fader (Fader Torque Adjustable)
Dimensions: 320(W) x 357(D) x 90(H) mm
Weight: 7.6 Kg
Supply voltage: AC 120 V, 60 Hz (U.S.A. and Canada models)
AC 230 V, 50 Hz (European models)
Power consumption: 43 W
Operational temperature: +5ºC to +35ºC
Operational humidity: 25% to 85%
Storage temperature: –20ºC to +60ºC
379mm
357mm
320mm
112mm
90mm
Unit: mm
Specifi cations