Filter
Top Products
tep 6 Select the Chorus Effect - Press the Effect button until the LED next to Chorus is flashing. If the Chorus
bypassed (indicated by two dashes -- in the Display), rotate the Data Wheel until the Display shows on.
ou will notice that the Parameter LEDs next to the words “Speed,” “Depth,” and “Level” are now lit. This
ndicates that these three Parameters are associated with the Chorus, and you can adjust these parameters. Press
he Parameter Edit button once and the Speed LED will begin to flash indicating that you are about to edit the
horus Speed. The Display will show the current value for the Chorus Speed. Since our sample Preset calls for a
ow medium Chorus, use the Data Wheel to set the Speed value to 5. Press the Parameter button again and the
epth LED flashes. Rotate the Data Wheel until the Display shows 10. Press the Parameter button again and the
evel LED flashes. Rotate the Data Wheel until the Display shows 50.