Filter
Top Products
tep 7 Turn the Delay off - Our Sample Preset called for no Delay to be used. So, press the Delay/Reverb
utton and the LED next to Delay begins to flash. Rotate the Data Wheel counterclockwise until the Display shows
wo dashes -- indicating that it is bypassed.
tep 8 Select the Reverb - Our sample preset called for a Hall type Reverb. Press the Delay/Reverb button
gain and the Reverb LED will light. Rotate the Data Wheel until the display shows HA for Hall. The Parameter
EDs next to the words Decay and Level light indicating that these parameters are available for Reverb adjustment.
ress the Parameter button and the Decay LED will flash. Rotate the Data Wheel until the Display shows 60.
ress the Parameter button again and the Level LED begins to flash. Rotate the Data Wheel until the Display shows
5 as the Reverb Level.
tep 9 Store the Preset - All that is left to do now is to store our new preset, otherwise the GS30 will forget the
hanges that we have made. Press the Store button once. The Store LED will begin to flash and the Display shows
he Preset used before we edited our effects. Rotate the Data Wheel to select the User Preset location to store this
ew sound. Once the desired location is in the Display, press the Store button again and the changes will be saved.
ongratulations! You have successfully created a new Preset.
27