Filter
Top Products
– 13 – ETAsys.com
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
ETA-ECS6RM ACCESSORY ITEMS
AP-GNL18 – LED Gooseneck LAMP
The Atlas Power AP-GNL18 is an optional LED Gooseneck Lamp and works with any of the ETA Systems 12VDC XLR base mount
connectors. The length of the gooseneck is 16".
ETA-15SH - Standalone 15A Power Conditioner and AC Spike Suppressor
This Electrical Control Module (ECM) is a 15A Power Conditioner and AC Spike Suppressor designed to be a standalone Single
Housing (SH) unit that can be placed up to 1000 ft away from the ETA-ECS6RM. To make full use of the ETA-15SH features, the
ECM must be connected to the ETA-ECS6RM controller to activate features such as AC Mains voltage monitoring, load current
monitoring, and Extreme Voltage Shutdown (EVS).
ETA-20SH - Standalone 20A Power Conditioner and AC Spike Suppressor
This Electrical Control Module (ECM) is a 20A Power Conditioner and AC Spike Suppressor designed to be a standalone Single
Housing (SH) unit that can be placed up to 1000 ft away from the ETA-ECS6RM. The ETA-20SH has several advanced features
incorporated, refer to the individual data sheet for full instructions and specifications on the module. Many of the ETA-20SH
features and connections are the same as the ETA-15SH.
ETA-20SH Mounting Tabs – There are two sets of mounting tab rails. Theses rails are designed to be breakaway if they are not
needed. Simply bend the tab back and forth until the tab breaks away.
ETA-ECS6RM
Electrical Control Sequencer