Filter
Top Products
professional control surface
Artist Series
USER GUIDESETUP AND INSTALLATION
18
8. Press and release the POWER switch on your MC Mix.
Look at the top-right of your screen and wait up to 60 seconds. A green icon
in the menu bar indicates correct installation.
If you did not see the green icon:
•See My Surfaces on page 42 and add the MC Mix manually.
• Shut down the MC Mix and the Mac and repeat steps 7 and 8.
• If your Mac is pre-2002 and you are using an Ethernet router or switch,
you need to purchase a normal straight-through Ethernet cable (instead
of the crossover Ethernet cable supplied) from a computer store.
•See www.euphonix.com/artist/support for the most current trouble-
shooting information.
9. Launch your application and open a project (Logic, Cubase, Digital Performer,
Pro Tools, etc.).
10. To set up your application to work with the MC Mix, refer to the EuCon Ap-
plication Setup Guide that you downloaded at the beginning of this section.
Logic users do not need this document because additional setup is not
required.
Controlling a Second Workstation
The MC Mix can control applications running on a second computer, referred to in
this guide as a workstation. Most users will not need to do this because EuControl
will be running on the same workstation as the their audio/video applications.
Insert the installation CD into your Macintosh or, if you downloaded the latest
software from the web, double-click on the installer. Follow the instructions to
install the software.
Copy the latest software that you downloaded at the beginning of this chapter
over to the second workstation. Double-click the Install EuCon Workstation installer
in the Extras folder and follow the instructions to install the EuCon software.