Filter
Top Products
♫
For a 30-day trial subscription, log on to: www.fender.
com/ejamming
• Connect G-DEC 3 to your computer as a USB drive to
enable direct media file management (see USB Drive
under Utility menus, on page 11).
Footswitch
Connect an (optional) Fender ULT-4 footswitch (P/N
0994070000) to your G-DEC 3 to enable remote control of
essential G-DEC3 functions. The footswitch screen and LEDs
show you some of the same information as the amplifier
display, so you can, for example, tune your guitar and select
presets by watching the footswitch without ever looking at
the G-DEC3 display!
• Select Quick Access presets
• Use the Tuner
• Select presets (up/down)
• Start/stop Band tracks
• Use the Phrase Sampler (play/record/overdub)
MODE/TUNER
MODE 1
MODE 2
MODE 3
QA1
DOWN
PLAY
QA2 QA3
UP SELECT
RECORD
OVERDUB
ASSY. P/N 0994070000
The footswitch has three modes that are indicated by the
three LEDs labeled MODE 1, MODE 2 and MODE 3. The
footswitch also has a Tuner mode which is indicated when all
of the mode LEDs are off.
To switch between modes, press the MODE button. To acti-
vate Tuner mode, press and hold the MODE button for 2
seconds.
Mode 1—In Mode 1 the footswitch is used to select Quick
Access presets as indicated by the labels (QA1 / QA2 / QA3)
under each button, in line with the MODE 1 LED. When you
select a Quick Access preset, the number of the preset will
appear in the display of the footswitch.
Mode 2—In Mode 2 the footswitch is used to select pre-
sets and start/stop the band track as indicated by the labels
(DOWN / UP / SELECT) under each button, in line with the
MODE 2 LED. When you select a preset, the number of the
preset will appear in the display of the footswitch.
Mode 3—In Mode 3 the footswitch is used to operate the
Phrase Sampler as indicated by the labels (PLAY / RECORD /
OVERDUB) under each button, in line with the MODE 3 LED.
The footswitch button LEDs indicate your Phrase sampler
actions, but the phrase progress bar is only displayed on the
G-DEC3 screen.
Tuner Mode—Press and hold the MODE button for 2 sec-
onds to activate the Tuner. The screen and the footswitch
both will display the same tuner information so that you can
look in either place to tune your guitar. The footswitch will
display the nearest note. The button LEDs will indicate sharp
and flat. "In tune" is indicated when the green LED below the
footswitch display lights up.
Press any footswitch button to exit Tuner mode.
FAQ
There are several great places you can go to learn more about
the G-DEC3 and music in general:
• www.fender.com/support
• Join a Fender Community forum where you can ask ques-
tions and read threads. There's even a forum just for the
G-DEC 3: www.fender.com/community/forums
• Log on to the Fender Knowledge Base to download
"G-DEC 3 Performance Notes" and read "Frequently
Asked Questions" (FAQ): www.fender.com/support/faqs.
php
• Find music theory learning materials and sheet music at
Hal Leonard Publications: www.halleonard.com
12
fen der.co m