Filter
Top Products
5 Menus
18 TASCAM X-9 Owner’s Manual
Function
Menu
display
Meaning Available settings Notes
Headphone EQ
01HP
Sets headphone EQ to
normal, high or low
boost
nOr
* (no EQ)
H
High boost
L
Low boost
HL
High and low boost
Can be performed on
both left and right menu
systems.
Takes immediate effect
before being confirmed.
Program 1 fader
start
02F1
Sets fader start for pro-
gram 1 on or off
OFF
* Fader start disabled
On
Fader start enabled
Can be performed on
both left and right menu
systems.
Program 2 fader
start
03F2
Sets fader start for pro-
gram 2 on or off
OFF
* Fader start disabled
On
Fader start enabled
Can be performed on
both left and right menu
systems.
Program 3 fader
start
04F3
Sets fader start for pro-
gram 3 on or off
OFF
* Fader start disabled
On
Fader start enabled
Can be performed on
both left and right menu
systems.
Program 4 fader
start
05F4
Sets fader start for pro-
gram 4 on or off
OFF
* Fader start disabled
On
Fader start enabled
Can be performed on
both left and right menu
systems.
Cross-fader A start
6cFA
Sets the cross-fader to
start signal A playback
OFF
Fader start disabled
On
* Cross-fader starts signal A
playback
Can be performed on
both left and right menu
systems.
Cross-fader B start
7cFb
Sets the cross-fader to
start signal B playback
OFF
Fader start disabled
On
* Cross-fader starts signal B
playback
Can be performed on
both left and right menu
systems.
Footswitch
assignment
08Ft
Sets the function of the
footswitches connected
to the X-9.
EF
* links to internal effects
(1=effect 1, 2=effect 2)
E
links to external effects (1& 2=
external)
S1
Sampler 1 (1=in, 2=out)
S2
Sampler 2 (1=in, 2=out)
CF
Crossfader (
1
on, hard A
side,
1
off, current position;
2
on, hard B side,
2
off, current
position)
Can be performed on
both left and right menu
systems.
EQ memory store
09EM
Stores currently-
selected EQ settings to
memory.
Use the left menu system for programs 1 and 3.
Use the right menu system for programs 2 and 4.
The
EQ MEMO
indicator lights when
09EM
is selected
When
ENTER
is first pressed, the lowest empty memory
bank number is shown. Use the dial to select a bank.
If the bank already contains a setting, the display shows
SURE
. Press
ENTER
to overwrite, or any other key to
cancel.
EQ memory recall
10Er
Recalls stored EQ mem-
ory settings to current
program.
Use the left menu system for programs 1 and 3.
Use the right menu system for programs 2 and 4.
The
EQ RECALL
indicator lights when
10Er
is selected
Use the dial to select a bank containing EQ memory (only
banks containing data are shown).
Press
ENTER
to recall the memory.