Filter
Top Products
9 EQ
TASCAM X-9 Owner’s Manual 29
The left display and controls can be used for pro-
grams 1 and 3, and the right for programs 2 and 4.
Use the selector switches to select the program.
Use the menu controls corresponding to the selector
switch to view the settings for the equalization.
Note that the
MONITOR setting has no meaning in
this mode.
When the
EFFECT key is off, and no menu settings
are being made, turn the
DATA knob until the HI, MID
or
LOW indicator is lit. The display shows the fre-
quency currently set for the program.
Turning either the gain or the frequency control for
the band changes the display to either the frequency
or the gain for that band.
Remembering and recalling EQ settings
The menu system is used to store the EQ settings of
the currently-selected program.
Use either the left or the right menu system for this
function, depending on the program. The left display
and menu system are used for programs 1 and 3, and
the right display and menu system are used for pro-
grams 2 and 4.
See “EQ memory store” on page 18 and “EQ mem-
ory recall” on page 18 about menu functions
09 and
10 for an explanation of how these are stored and
recalled to the 100 memory banks.
All memories can be erased using the menu system
(see “Clear all EQ memories” on page 20—
24Ac)