Filter
Top Products
30 TASCAM X-9 Owner’s Manual
10 – Specifications, etc.
I/O specifications
Audio I/O
Control I/O
Analog inputs
LINE 1
through
LINE 4
RCA pin (unbalanced)
Input level –16 dBV
Input impedance 47 k
Ω
PHONO 1
through
PHONO 4
RCA pin unbalanced (with additional
SIGNAL GND
connector)
Input level –54 dBV
Input impedance 47 k
Ω
MIC
input
XLR balanced (female)
a
a. All XLR connectors are wired 1=ground, 2-live (hot), 3=return (cold)
Input level –55 dBV
Input impedance 2.7 k
Ω
RETURN
(
L
,
R
)
1/4” jack (unbalanced)
Input level –10 dBV
Input impedance 22 k
Ω
Analog outputs
MASTER OUTPUT (BALANCED)
XLR balanced (male)
a
Output level + 4dBu
Output impedance 75
Ω
MASTER OUTPUT (UNALANCED)
RCA pin (unbalanced)
Output level –10 dBV
Output impedance 1 k
Ω
BOOTH OUTPUT
RCA pin (unbalanced)
Output level –10 dBV
Output impedance 1 k
Ω
SEND
(
L
,
R
)
1/4” jack (unbalanced)
Output level –10 dBV
Output impedance 1 k
Ω
PHONES
(x 2)
Stereo 1/4” jack
Maximum total output level 30 mW + 30 mW
Total load impedance 32
Ω
Digital inputs
CH 1, CH 2
RCA pin, IEC60958 TYPE I or TYPE II (auto-detect)
Digital output
DIGITAL OUT
RCA pin, IEC60958 TYPE II (SPDIF)
FADER STOP/START 1
through
4
3.5 mm mini-jack (high=5 V, Low (on)=0 V) Tip=PLAY, GND=READY
FOOT SW 1, FOOT SW 2 1/4” jack (for use with RC-30P)