Gemini CDM-3610 DJ Equipment User Manual


 
Congratulations on purchasing the Gemini CDM-3610
Professional CD/MP3 DJ Work Station. This unit is
backed by a (1) year warranty. Prior to use, we urge that
you understand all instructions and features.
Player Section-
-Audio CD, & CD-R, & MP3 compatible
-Anti-shock using RAM buffer memory
-Large blue backlit LCD display with text for MP3
-3 Selectable Jog modes Scratch Effect/Cue Search/
Pitch Bend
-Instant-start & cue with preview
-Instant reverse for added effect
-Brake mode for vinyl-like stops
-Fader-Start capability
-High-speed search using SEARCH buttons
-Single & Continuous play modes
-One seamless loop per side with reloop
-Pitch bend via jog wheel or buttons +/- 16%
-Three mode-time selection
-Frame accurate search
-Rubber jog wheels with nger grips
-Variable pitch control with three settings +/- 4, 8 & 16%
- Fully programmable with repeat function
Mixer Section-
-3-band EQ w/ Gain Control
-1/4” headphone output
-XLR and 1/4” mic input
-Auxiliary Inputs for Phono or Line devices
Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5 mW
1. Do not use this CD player at temperatures below
41°F/5°C or higher than 95°F/35°C.
2. The apparatus should not be exposed to dripping or
splashing, and no objects lled with liquids such as vas-
es should be placed on the apparatus.
3. Place the unit in a clean and dry location.
4. Do not place the unit in an unstable location.
5. When disconnecting the power cord from the AC out-
let, always grasp by the plug. Never pull the power cord.
6. To prevent electric shock, do not remove the cover or
the bottom screws.
7. There are NO USER SERVICEABLE PARTS INSIDE.
Please refer to a qualied technician.
(IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH
THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1
(732) 346-0061. DO NOT ATTEMPT TO RETURN THIS
EQUIPMENT TO YOUR DEALER.)
8. Do not use chemical solvents to clean the unit.
9. Keep the laser pickup clean by keeping the tray closed.
10. Keep this manual in a safe place for future reference.
POWER: Plug in the power cord of the CDM-3610.
CONVERTIBLE PHONO/LINE INPUTS: The CDM-3610 has
2 CONVERTIBLE PHONO/LINE RCA INPUTS when
switched to the PHONO position (see below) you may
use any Turntable with a magnetic cartridge, remember
to connect your ground wire (see GROUNDING SCREW)
or there may be a system hum. When the switch is in the
LINE position you may connect any line level device as
described before (MP3, CD, Tape etc). Now you may plug
the RCA’s from your playable medium into each input to be
connected to their respective CHANNELS.
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH IN-
PUT MAY CAUSE THAT MIXER CHANNEL TO OVERLOAD
AND OR DISTORT.
CONVERTIBLE LINE SWITCHES: These small switches al-
low you to choose between a PHONO (Turntable) input or
a LINE level (MP3, CD, Tape player etc..).and require the
proper switching.
MASTER RCA OUTPUT (UNBALANCED): The MASTER
RCA output connects the mixer to your main amplier us-
ing standard audio cables with RCA-type connectors.
RECORD RCA OUTPUT: RCA output jacks can be used
to connect the mixer to the record input of your record-
ing unit, thus enabling you to record your mix with RCA
cables.
MASTER XLR OUTPUT (BALANCED): Allows you to con-
nect balanced XLR cables to MASTER OUTPUT of the
CDM-3610 both the RCA and XLR outputs can be used at
the same time but are both controlled via the same MAS-
TER OUTPUT.
HEADPHONE OUTPUTS: The HEADPHONE OUTPUTS lo-
cated at rear center and front center of the CDM-3610 will
accept any headphone with a standard 1/4” connector and
or adaptor and will allow you to CUE your music program
before you play it. Volume adjustment and PGM mix of the
HEADPHONE (see CONTROLS) below.
MIC (MICROPHONE) INPUTS: The main MIC or Micro-
phone inputs are located at the back right-hand corner
and front panel of the CDM-3610 and will accept any bal-
anced and unbalanced XLR as well a standard 1/4” con-
nector. Gain control for the mic (See CONTROLS) below.
INTRODUCTION:
FEATURES:
SAFETY SPECIFICATIONS:
PRECAUTIONS:
CONNECTIONS:
8
CDM-3610
2
1
3
4
5
6
7
4