Filter
Top Products
H3123 Electric Guitar Kit -15-
11. Solder the black wire to the spring hanger.
12. Secure the spring hanger to the guitar body
with the included two 1
1
⁄2" wood screws.
13. Hang the three springs from the spring hang-
er to the tremolo bridge as shown in Figure
24.
Figure 24. Correct spring placement.
Strap Button
The strap buttons are positioned on the guitar as
shown in Figure 25.
To attach the strap buttons to the guitar body:
1. Using a
3
⁄32" drill bit, drill
3
⁄4" deep holes at
each of the mounting locations.
2. Secure the strap buttons to the guitar body
with the included two
3
⁄
4" wood screws.
Figure 25. Strap buttons.