M-Audio 61es Musical Instrument User Manual


  Open as PDF
of 20
 
|
10
KeyStudio User Guide
As with Program changes, if the Octave “<” and “>” buttons are selected to vary the Bank LSB or MSB number (Method 1),
the lights above the buttons will not change, since it is not possible to have a Bank with a negative value. Pressing both the
“<” and “>” buttons together will recall Bank 0.
Bank change messages must be followed by a program change message in order to recall a sound. Bank change messages
by themselves do not activate a sound, but only locate and access a predefined location of a set (bank) of 128 sounds.
PLEASE NOTE: Each time the keyboard is turned off, optional MIDI parameters assigned to the Octave buttons will be lost.
When the keyboard is powered up, the Octave buttons will default to controlling octave shift.
Other Assignable Controllers
9
The Modulation Wheel
ItispossibletoassigndifferentMIDIcontrollernumberstotheModulationwheel.TheseparametersarecalledMIDIcontinuous
controllers.Thereare132(countingfromandincludingzeroto131)MIDIcontinuouscontrollers(MIDICC’s).Forthesecontroller
valuestohaveanyeffectonthesound,thereceivingsoftwareordevicehastobeabletoreadandrespondtotheseMIDIcontroller
messages. KeyStudio accepts controller numbers 0-131. Numbers beyond 127 are a proprietary method M-Audio uses to simplify
thetransmissionofcertain,otherwisemorecomplicatedmulti-partMIDImessages.Afulllistofcontrollervaluesisgivenattheback
of this manual in Appendix B.
Some useful MIDI CC’s are:
< 01 Modulation
<07Volume
< 10 Pan (balance)
< 05 Portamento
To assign a MIDI controller message to the Modulation wheel:
1. Press the Edit Mode button.
2. PresstheblackkeyaboveC4(C#4),representing“WHEELASSIGN.”
3. UsetheNumericalDataEntrykeysG3–B4toenterthenumberoftheMIDIcontrolleryouwanttoassigntothe
Modulation wheel.
4. Press the ENTER key (C5).
5.MovetheModulationwheelupwardstoincreasethevalueoftheMIDImessagesent.
Ifyoumakeanerrorwhileenteringthenumericaldatavalue,youcanpresstheCANCELkey(C1)toexitEditmodewithout
changingtheMIDICCassignedtotheModulationwheel.
 previous next