Filter
Top Products
112 Appendix F: Modification For VeniceU16 Rack Mounting
VeniceU
Operator Manual
9 Fit the blanking bracket that you removed in step 4 (highlighted in green below)
to the rear of the console.
10 Secure one end of the blanking bracket to the side panel using the remaining two
(of the seven) screws that you removed in Step 3.
11 Turn the console 180 degrees so that it rests on its other side and fit (but do not
tighten) the seven screws that you removed in Step 3. Tighten the screws.
These two
screws secure
the blanking
bracket