Filter
Top Products
84 Appendix B: Technical Specification
VeniceU
Operator Manual
Table 4: VeniceU performance specifications
Input impedance Mic
Line
2k balanced
10k balanced
Input gain Mic
Line mono channel
Line stereo channel
Line level inputs
Continuously variable from
10dB to 60dB
Continuously variable from
0dB to 50dB
Continuously variable from
minus infinity to +20dB
0dB
Maximum input level Mic
Mic + pad
Line mono channel
Line mono channel + pad
Line stereo channel
+11dBu
+31dBu
+21dBu
+41dBu
+26dBu
CMR at 100Hz Mic (gain +40dB) Typically -80dB
CMR at 1kHz Mic (gain +40dB)
Mic + pad (gain +40dB)
Line mono channel (0dB)
Line stereo channel (0dB)
Line mono channel +
pad (0dB)
Typically 80dB
Typically 70dB
Typically 70dB
Typically -50dB
Typically 70dB
Frequency response Mic to mix (gain +60dB) 0dB to -1dB
Noise (20Hz to 20kHz) Mic EIN at +60dB gain (mono
channel)
Mic EIN at +60dB gain (stereo
channel)
Mic EIN at +40dB gain (mono
channel)
Mic EIN at +40dB gain (stereo
channel)
0dB line to direct output
(mono)
-128dBu
-128dBu
-125dBu
-125dBu
-97dBu
USB digital audio Sampling frequency
Bit rate
Dynamic range (20Hz to
20kHz)
48kHz or 44.1kHz
24-bit only
A-D 109dB unweighted, 112dB
A weighted
D-A 107dB unweighted, 110dB
A weighted
System noise (20Hz to
20kHz)
Summing noise (16 channel
routed with faders down)
Line to mix noise (16 channels
routed at 0dB, pan centre)
-90dBu
-86dBu
Distortion at 1kHz Mic to mix (0dB) 0.03%
Crosstalk at 1kHz Channel to channel
Mix to mix
Channel to mix
Fader attenuation
< -90dB
< -90dB
< -90dB
> 90dB
Output impedance All line outputs
Headphones
50 ohms balanced source
To drive 32 ohms
Maximum output level Line outputs (into 600R)
Headphones (into 50R)
+21dBu
+18dBu (750mW)