Filter
Top Products
Fader, routing and meter 55
VeniceU
Operator Manual
Meter
The meter is especially useful when setting the microphone gain of a channel. Also, as
the meter is post-EQ, it is possible to see the effect that the channel equalisation has
upon the level. It may be necessary to turn the input gain down when excessive EQ is
used to prevent the channel from overloading.
The LEDs represent the following:
• 18 (red): +18dB, overload (peak)
• 12 (yellow): +12dB, high level
• 0 (green): 0dB, normal level
• -18 (green): -18dB, shows signal is present