Optimus SSM-1250 Music Mixer User Manual


 
13
4. Stop playback of the selected in-
put source.
5. To preset the
LINE 1
input source,
set
PHONO 1
/
LINE 1
to
LINE 1.
Then repeat Steps 2–4.
Note:
If you have to readjust
MAS-
TER
when performing Step 3, re-
member that this affects the level
of the previously preset input
sources. You must readjust those
sources until you get a reading of
up to
0
on the VU meters for each.
6. To preset the
PHONO 2
input
source, set
PHONO 2
/
LINE 2
to
PHONO 2
.
7. Start playback of the selected in-
put source.
8. Slowly slide up the
CH 2
volume
level slide control until you get a
reading of up to
0
on both VU
meters.
illustration of
PHONO 2/LINE 2 set
to PHONO 2
illustration of CH 2 control
Im
p
ortant:
Write down or remem-
ber the
CH 2
volume level slide
control’s setting for the selected
audio source, so each time you
want to mix that source you can
slide the
CH 2
volume level slide
control to the correct setting.
Note:
If it was necessary to set
the
CH 2
volume level slide control
all the way to
10
in order to get a
reading of up to
0
on the VU
meter, then slide
CH 2
down to
about
8
and rotate
MASTER
clock-
wise until you get the reading of
0
on the VU meters.
9. Stop playback of the selected in-
put source.
10. To preset the
LINE 2
input source,
set
PHONO 2
/
LINE 2
to
LINE 2.
Then repeat Steps 7–9.
Note:
If you have to readjust
MAS-
TER
when performing Step 8, re-
member that this affects the level
of the previously preset input
sources. You must readjust those
sources until you get a reading of
up to
0
on the VU meters for each.
11. To preset the
LINE 3
input source,
set
LINE 3
/
LINE 4
to
LINE 3
.
12. Start playback of the selected in-
put source.
illustration of
LINE 3/LINE 4 set to
LINE 3
32-3009.fm Page 13 Tuesday, August 10, 1999 8:31 AM