Filter
Top Products
8
3. Connect a microphone (not sup-
plied) to the mixer.
• If the microphone has an XLR
plug, connect it to
MIC
on the
top left corner of the front panel.
• If the microphone has a
1
/
4
-inch
plug, connect it to
MIC
on the low-
er right corner of the back panel.
Note:
We recommend you do not
connect an XLR and a
1
/
4
-inch
plug microphone to the mixer at
the same time.
CONNECTING POWER
Connect the power cord to a standard
AC outlet.
Note:
The power cord has a polarized
plug that fits only one way into a stan-
dard AC outlet. If the plug does not fit,
turn it clockwise so it fits properly. Do
not force the plug into the AC outlet or
you could damage the outlet or the
plug.
CONNECTING A LAMP
The mixer has a 12V BNC lamp sock-
et for connecting a 12V DC/3W lamp
(RSU Cat. No. 11443363) so you can
see the control panel in dark or low-
light conditions.
Caution:
Use only a 12V DC/3W
lamp.
illustration of microphone
plug being inserted into jack
Do not show entire
microphone
illustration of microphone
plug being inserted into jack
Do not show entire
microphone
illustration of lamp
being connected
32-3009.fm Page 8 Tuesday, August 10, 1999 8:31 AM