Filter
Top Products
21
REPLACING THE FUSE
The mixer uses a fuse for protection
from power surges and short circuits.
If the mixer suddenly turns off and will
not turn on, check the fuse. If neces-
sary, replace the fuse with a 0.5-amp,
250-volt, fast-acting, 1
1
/
4
×
1
/
4
inch fuse
such as Cat. No. 270-1003 (not sup-
plied).
Follow these steps to replace the fuse.
1. Disconnect power from the mixer.
2. Using a Phillips screwdriver, un-
screw the fuse compartment cap
on the back of the mixer.
3. Remove the old fuse and insert
the new one.
Caution:
Make sure you replace
the fuse only with another fuse of
the same type and rating.
4. Replace the fuse compartment
cap.
5. Reconnect power.
illustration
32-3009.fm Page 21 Tuesday, August 10, 1999 8:31 AM