Filter
Top Products
17
• Do not slide
CROSS FADER
to the
center if you want to
monitor
one
channel while the other is playing.
Otherwise, the sound from the
channel you monitor will also be
heard through your sound system.
Instead, slide
CROSS FADER
to
the channel you are not monitor-
ing. For example, to monitor chan-
nel 1 (selected by
ASSIGN A
)
while channel 2 (selected by
AS-
SIGN B
) is playing, slide
CROSS
FADER
to
B
.
•Use
CUE/PGM
to listen to the input
controlled by the
CUE ASSIGN
switch and what is playing on the
currently selected output device.
When
CUE/PGM
is set to
CUE
, you
only hear the channel selected by
the
CUE ASSIGN
switches. When
CUE/PGM
is set to
PGM
, you only
hear what is playing on the cur-
rently selected output device. Ro-
tate
CUE/PGM
to listen to both
inputs at the same time.
USING TALKOVER
When you are not using the micro-
phone, leave
OFF/ON/TALKOVER
set
to
OFF.
The microphone’s input is
turned off and all other audio input
sources are unaffected.
If you want to use a microphone:
•Set
OFF/ON/TALKOVER
to
ON
to
mix the microphone equally with
the other audio input sources.
•Set
OFF/ON/TALKOVER
to
TALK-
OVER
to mix the microphone at a
higher level than the other audio
input sources.
Your voice sounds clearly through
the microphone, but all the other
audio input sources sound at a
lower level. (This is useful for pag-
ing.)
illustration of switch
set to TALKOVER
32-3009.fm Page 17 Tuesday, August 10, 1999 8:31 AM