Filter
Top Products
19
Connecting to an M66 Block
Use the optional T1 mass termination cable to connect up to seven NAMs to an M66
block. The T1 mass termination cable is a 5-foot RJ48H cable consisting of a 50-pin
plug-to-seven RJ48C plugs.
Procedure
1. Insert RJ48C plugs
on the RJ48H
network cable into up
to seven FrameSaver
unit NET interface(s).
2. Insert the 50-pin plug
end of the cable into
the M66 block.
3. Follow Steps 3 and 4
in
Connecting to the
Network
on page 18
to verify the
connection.
00-16837
M66 Block
NAMs
RJ48C
Plugs
50-Pin Plug
Plug Number
Label