Filter
Top Products
p.15
mono input module
bus assignment features
The Input bus assignment section offers considerable flexibility for creat-
ing what eventually becomes the main output mix. Such features as
LCR,
GROUP PAN ON
and eight-individual group assignments allow several
approaches to building the desired mix.All assignments are derived post-
fader,post-eq, and post-mute.
left-center-right—LCR
This feature is used to precisely position a signal in a sound system with a
center speaker cluster in addition to left and right clusters.The
PAN control
becomes an integral part of how the input-signal is sent to the
LEFT, CEN-
TER, and RIGHT outputs.
The post-fader signal is assigned to the
LEFT
,RIGHT, and MONO/CENTER
buses.Relative amounts of the signal fed to each bus is determined by the
position of the
PAN control.
pan control
The pan control positions the signal within the stereo left/right field,
(or between left
/
center or center
/
right in
LCR mode).The signal must be
assigned as stereo in order for the pan control to have any affect.
see—left-center-right
mute
The Mute switch mutes the channel as well as both pre- and post-
fader
AUX SENDS.
write-in label
This label may be written on with a grease-marker,and later wiped clean
with a cloth moistened with isopropyl/rubbing alcohol. Masking tape may
also be placed on this surface, if desired.
1
An internal jumper
can be used to defeat
pre-fader muting.
+