Filter
Top Products
p.75
master module
talkback features
The TALKBACK
system provides facilities for assigning an external signal
(usually the console operator's microphone) to any of the console's out-
puts.Other signals can be routed through the
TALKBACK
system include the
tone oscillator or the built in
PINK NOISE generator.
talkback level
This control sets the level that appears at any of the outputs with
their respective
TALK TO switches engaged. It also governs the audio level
at the
TALKBACK output XLR connector on the rear panel.
pink noise
The TALKBACK in-connector is disabled and PINK NOISE is sent though
the
TALKBACK
system.
talkback on—TALK ON
This switch must be activated for the
TALKBACK
system to operate.
There are two-ways to activate it:
1 Momentary - Depressing the button for more-than 1/2 of a second will
cause it to act as a momentary switch.When the button is released, the
TALKBACK
section will be shut-off.
2 Toggle - A quick tap on the button (less-than 1/2 second) will cause the
switch to electronically change its state from on-to-off or from off-to-on.
5