Filter
Top Products
right master features
signal/peak LED—SIG/PEAK
This dual-color
LED responds to the right pre-fader stereo signal. It
illuminates green with varying brightness in proportion to the audio signal.
When the signal approaches clipping, either pre- or post-fader, the
LED
illuminates red.
right—TALK TO
The TALKBACK system output is added to the left and right MASTER
outputs.The level of the TALKBACK signal is set by the TALKBACK level con-
trol in the
MASTER section.
left/center/right—LCR TO MASTER
This feature is useful for monitoring the console when creating an
LCR
mix. Local monitoring is usually done with one or two speakers.The
LCR
to outputs feature combines the center (or mono) signal with the left and
right signals,creating a phantom center channel.This feature affects the
ALT
OUT
section, the MONITOR OUT
section, the HEARING ASSIST output and the
headphone feed.
Center (mono) channel is not included in the
MONITOR paths.
The center (or mono) channel is combined with left and right
MON-
ITOR
outputs.This makes it possible to hear the center channel without a
designated speaker.
right master fader
This fader governs the main right output level.
after-fader listen—AFL
When this switch is depressed, the right post-fader signal is sent to
the console solo system.
LED
p.71
master module
5