Filter
Top Products
p.47
group module
fader reverse
The AUX /
GRP feature is used to swap the functions of the
AUX MASTER con-
trols and the
GROUP MASTER
controls and the
AUX MASTER and LEFT/RIGHT
MAIN
controls.
Swapped controls include: the
TALK TO
switch, the SOLO switch, the
MUTE
switch,and the MASTER LEVEL
control (via rotary control on the
AUX MASTER
and a fader on the GROUP MASTER
).
reversing aux / group and aux / main
AUX—red LED off
The
AUX 1–6 and GROUP 1–4 MASTER and LEFT/RIGHT MAIN level controls,
SOLO,MUTE and TALKTO switches operate as normal in their default con-
figuration.
GRP—red
LED
on
AUX and GROUP functions are reversed.
The
AUX 1–6 output levels are controlled by the output faders.
The
AUX SAFE PREVIEW LED,AUX SOLO, and AUX TALK TO switches apply to
the
GROUP output signal.
The
GROUP 1–4 and LEFT/RIGHT MAIN output levels are controlled by the
rotary
AUX 1–6 MASTER level controls.
The
GROUP SOLO, GROUP MUTE and GROUP TALK TO switches apply to the
AUX
output signal.
aux 1–6 output level
The AUX MASTER output level controls set the levels that appear at the
corresponding
AUX output connectors on the rear-panel.
talk to—aux 1–6
Adds the TALKBACK system output to the associated AUX output.The
level of the
TALKBACK signal is set by the TALKBACK level control in the MAS-
TER section.
after-fader listen—
AFL
Pressing this switch will include the AUX (when illuminated) or
exclude (when not illuminated).
see—master module
LED
3