Peavey X-Four Music Mixer User Manual


 
p.73
master module
mono master features
signal/peak LED—SIG/PEAK
This dual-color LED responds to the pre-fader mono signal.It illumi-
nates green with varying brightness in proportion to the audio signal.
When the signal approaches clipping, either pre- or post-fader, the
LED
illuminates red.
talkback mono—TALK TO MONO
The
TALKBACK
system output is added to the mono MASTER output.
The level of the
TALKBACK signal is set by the TALKBACK level control in the
MASTER section.
main left/ main rightL–R TO MONO
The MAIN left and right post-fader signals are summed together as a
mono signal and are routed to the mono bus.The summed left and right
signals automatically combine with any signals that are assigned directly to
the mono bus to make up the mono output.
The mono output consists exclusively of signals assigned directly to
the mono bus. Signals that appear at the
MAIN
left and right faders do not
appear at the mono output.
mono master fader
This fader governs the mono output level.
after-fader listenAFL
When this switch is depressed,the mono post-fader signal is sent to
the console solo system.
solo on indicator
This LED will illuminate when the solo system is active.
LED
5