Filter
Top Products
p.55
group module
rear panel features
auxiliary 1–6 output XLR’s
This balanced male
XLR connector carries the AUX output signal.
These outputs are controlled by their respective
AUX output level controls.
see—aux section,front panel description
aux insert point
Separate
1/4" TRS jacks provide the ability to insert an external
signal processor into the signal path of the
AUX.
aux insert send
This output connects to the input of an external signal proces-
sor. The signal is derived after the group-summing amplifier.
This output is ground-compensated.
group inputs 1–4
These 1/4" TRS
jacks accept balanced or unbalanced line-level signals.
They act as external inputs for
GROUPS 1–4.
lamp dim
Goose-neck lamps light-up at full intensity.
Goose-neck lamps light-up at medium intensity.
M
3
Plugging a 1/4" plug
into this jack does not
break the internal signal
flow of the Group.
+