Filter
Top Products
25
En
English
Types of BEAT EFFECT
DELAY
1
Original
(4 beats)
1/2 delay
(8 beats)
This function outputs a delay sound once according to the beat button’s
fraction.
When 1/2 beat delay sound is added, 4 beats become 8 beats.
Beat buttons (parameter 1)
Use these to set the delay time from 1/8 to 4/1 with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the delay time.
1 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and the delay sound.
EFFECT FREQUENCY
(parameter 4)
Use these to set the balance between the original
sound and the delay sound for the different bands.
ECHO
1
2
Input sound turned off
Time
Fade-out
1 beat
This function outputs increasingly attenuated delay sounds several
times according to the beat button’s fraction.
With 1/1 beat echoes, the delay sounds are faded out according to the
track’s tempo even after the input sound has been cut.
Beat buttons (parameter 1)
Use these to set the delay time from 1/8 to 4/1 with
respect to 1 beat of BPM time.
TIME control (parameter 2)
Use this to set the delay time.
1 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and the echo sound.
EFFECT FREQUENCY
(parameter 4)
Use these to set the balance between the original
sound and the echo for the different bands.
MULTI TAP DELAY
1
MIN MAX
MIN MAX
EFFECT FREQUENCY
MIN MAX
1/8 beat
1/4 beat
1/1 beat
Time
This function outputs up to 7 delay sounds in 1/8 units, according to the
beat button’s fraction.
The volume of the delay sound can be adjusted with the
[EFFECT FREQUENCY] controls.
The volume of the odd delay sounds is adjusted from [MIN] to the center
position, the volume of the even delay sounds is adjusted from the cen-
ter position to [MAX].
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to
1 beat of BPM time.
TIME control (parameter 2)
Use this to set the delay time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and the delay sound.
EFFECT FREQUENCY
(parameter 4)
This sets the volume of the delay sound for the
different bands.
REVERB
1
2
Level
Direct sound
Early reflected sound
Reverberations
1%
100%
Time
This function adds a reverberation effect to the input sound.
Beat buttons (parameter 1) Set the reverberation effect and room size.
TIME control (parameter 2)
Set the reverberation effect and room size to a
number between 1 and 100 (%)
LEVEL/DEPTH control
(parameter 3)
Sets the balance between the original sound and the
effect sound.
EFFECT FREQUENCY
(parameter 4)
Use these to set the balance between the original
sound and the effect sound for the different bands.
ROLL
1
2
Effect turned on
Repeated
Original
1/1 roll
This function records the input sound at the point at which the [ON/OFF]
button is pressed and repeats the recorded sound according to the beat
button’s fraction.
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to
1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and ROLL.
EFFECT FREQUENCY
(parameter 4)
Use these to set the balance between the original
sound and the ROLL for the different bands.
SLIP ROLL
1
2
1/1 repeat1/2 repeat
Original
Roll
Changed from 1/2
to 1/1
Effect turned on
This function records the input sound at the point at which the [ON/OFF]
button is pressed and repeats the recorded sound according to the beat
button’s fraction.
When the effect time changes, the input sound is recorded again.
Beat buttons (parameter 1)
The effect time is set from 1/8 to 4/1 with respect to
1 beat of BPM time.
TIME control (parameter 2)
Use this to set the effect time.
10 to 4000 (ms)
LEVEL/DEPTH control
(parameter 3)
Use this to set the balance between the original
sound and ROLL.
EFFECT FREQUENCY
(parameter 4)
Use these to set the balance between the original
sound and the ROLL for the different bands.