Filter
Top Products
7
2. Attach two Round Base Pads (57) to the base of
the right Upright (69) with two 1" Tek Screws
(
39).
Attach a Wheel (66) to the base of the right
U
pright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown.
Do not overtighten the
W
heel Bolt;
t
he Wheel should turn freely.
39
66
32
39
69
57
64
2
4. Attach two Round Base Pads (57) to the base of
the left Upright (69) with two 1" Tek Screws (39).
Attach a Wheel (66) to the base of the left
Upright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown.
Do not overtighten the
Wheel Bolt; the Wheel should turn freely.
39
57
69
66
32
64
39
4
3. With the help of a second person, carefully tip
the treadmill onto its right side. Do not fully fold
the frame until the treadmill is completely as-
sembled.
Insert the other Extension Leg (63) into the base
of the Uprights (69). Hold an Extension Leg Nut
(46) in the bottom of the Extension Leg, and
thread a 2.25” Bolt (93) with a 5/16” Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2.75” Bolt (100) with a 5/16” Star
Washer (101) into the bottom of the Extension
leg. Firmly tighten the Bolts.
100
93
101
69
46
63
3
57
101
57